Distillation Labware
Glassware and replacement parts designed to carry out distillations in laboratory settings; includes condensers, distillation heads, receivers, etc. Products are available for various scales and for specialty distillations.
Distillation is a process used widely in the laboratory or in wider working environments for separating or purifying liquids or liquid mixtures based on the different boiling points of individual components.
Distillation Applications:
• Separation and purification of miscible liquid mixtures in organic chemistry
• Drying of solid residues and/or solvent removal
• Fractional distillation of liquids from polymers and petroleum products
• Removal of particulates or other solid contaminants
• As part of a water purification system for production of distilled water for laboratory use
• Specialist steam distillation-based applications such as Kjeldahl analysis of nitrogen and proteins in food, beverage, or environmental samples
What Types of Distillation Equipment Are Available?
Conventional distillation apparatus, typically comprising individual, jointed borosilicate glassware components assembled by the user (depending upon the application), using appropriate clamps, stands, and supports. Most conventional distillation assemblies combine a round-bottomed distilling flask to contain and heat the liquid(s) that require purification, fitted with a stoppered or jointed neck to which is attached a downward-sloping, inclined side-arm for connection to a condensing unit to cool the heated vapors back down to their liquid state. Heating mantles are the preferred heat source for improved temperature control. These conventional distillation units are also available supplied complete and ready-assembled for added convenience and ease of use.
Specialized automated distillation equipment, notably units designed for the determination of volatile acidity and alcoholic strength by volume in wines, musts, and alcoholic beverages, and units designed for Kjeldahl nitrogen or protein determinations.
Chemglass Life Sciences Distilling Head, 500mL, Solvent, Modified, 24/40 Inner Joint On Take-Off
Distilling Head, 500mL, Solvent, Modified, 24/40 Inner Joint On Take-Off. Designed to maintain distilled solvents in an inert atmosphere. Top of main vapor tube is open and an additional vapor tube has been added to decrease risk of pressure buildup. Upper sampling port has a 4mm PTFE stopcock with a 14/20 outer joint for use with CG-3022 septa. Lower drain is centered to allow total drainage of storage head. Double oblique 2mm bore PTFE stopcock on the 250 through 1000mL sizes allows for removal of distilled solvent or return to flask. The 250mL size has a 4mm double oblique stopcock. Both the uptake tube and top outer joints are 24/40, while the take-off tube is supplied with a 24/40 inner joint.**Design suggested by Dr. A.K. Saksena, Schering Plough Research Institute, Kenilworth NJ.
Chemglass Life Sciences Adapter, Distillation, 29/42 Inner Joints, Bent 75°
Adapter, Distillation, 29/42 Inner Joints, Bent 75¿, with standard taper inner joints at a 75¿ angle to one another.
Chemglass Life Sciences Distilling Receiver, 5mL, Moisture Test, Bidwell-Sterling, 24/40 Joint Size, Approx. 275mm Height x 90mm Width
Distilling Receiver, 5mL, Moisture Test, Bidwell-Sterling, 24/40 Joint Size, Approx. 275mm Height x 90mm Width. Bidwell-Sterling type receiver used to determine the moisture in foods and organics. Made to ASTM specification E123. Also conforms with many methods of American Oil Chemists Society. Both the 5 and 10ml capacities have subdivisions of 0.1mL.
Chemglass Life Sciences Distilling Column, Snyder, 24/40 Joint, 150mm, Improved
Distilling Column, Snyder, 24/40 Joint, 150mm, Improved. Three section Snyder column with improved design to prevent column flooding. Column has a 24/40 top outer joint and a 24/40 lower inner joint for use with CG-1308 Kuderna-Danish flask.
Chemglass Life Sciences Distilling Column, 24/40 Joint, 300mm, Vigreux
Distilling Column, 24/40 Joint, 300mm, Vigreux. Vigreux style column with indentations that run the entire length of the column for improved vapor-liquid contact. Column length refers to the effective length, measured from the lowest to highest indent in the column. Column has a top outer and lower inner standard taper joint.
Chemglass Life Sciences Adapter Only, Distribution, 14/20 Joint
Adapter replacement part for the CG1276 series of cow type design distillation receivers. 14/20 Joint. Adapter only.
Chemglass Life Sciences 350mL HW Pressure Vessel, Round Bottom, #25 Internal Thread, Complete, 82.5mm O.D. x 142mm Length, Bushing Size/25
350mL Heavy Wall Pressure Vessel, Round Bottom, #25 Internal Thread, Complete, 82.5mm O.D. x 142mm Length, Bushing Size/25. Heavy wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The design allows hand tightening/loosening for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Supplied complete with vessel, PTFE bushing & Viton o-ring. Optional Perfluoro o-ring has the chemical resistance & service temperature range similar to Kalrez 4079. See CG-362, CG-364, and CG-366 for optional PTFE Bushings.IMPORTANT NOTICE: ALL CHEMGLASS PRESSURE VESSELS ARE TESTED AT 150 PSI, OR APPROX TWO AND ONE-HALF TIMES THEIR RECOMMENDED WORKING PRESSURE. HOWEVER, CHEMGLASS DOES NOT GUARANTEE THE VESSEL FROM BREAKING UNDER PRESSURE, DUE TO THE NATURE OF MATERIAL AND CONDITIONS BEYOND OUR CONTROL. CHEMGLASS RECOMMENDS THE USE OF SAFETY SHIELDS AND/OR OTHER SAFETY EQUIPMENT.
Chemglass Life Sciences Vacuum Trap Body Only, 34/45
Vacuum Trap Body Only, 34/45. Replacement part for CG451404.
Chemglass Life Sciences Clamp, Chain, Small
Clamp, Chain, Small. Small size chain clamps to accommodate up to 6 1/2” (170mm) O.D. Quick slip-on chain connection has large, easy-to-turn adjusting knob. Extension arm has a length of 6” (150mm). Grip is vinyl coated.
Chemglass Life Sciences Distilling Receiver, 10mL, Moisture Test, Dean-Stark, 14/20 Joint Size, Approx. 250mm Height x 80mm Width
Distilling Receiver, 10mL, Moisture Test, Dean-Stark, 14/20 Joint Size, Approx. 250mm Height x 80mm Width. Similar to CG-1258 but with the addition of an overflow tube between the uptake tube and the graduated receiver.
Chemglass Life Sciences Distilling Receiver, 10mL, Moisture Test, Dean-Stark, 24/40 Joint Size, Approx. 250mm Height x 90mm Width
Distilling Receiver, 10mL, Moisture Test, Dean-Stark, 24/40 Joint Size, Approx. 250mm Height x 90mm Width. Similar to CG-1258 but with the addition of an overflow tube between the uptake tube and the graduated receiver.
Chemglass Life Sciences Distilling Receiver, 25mL, Moisture Test, Dean-Stark, 24/40 Joint Size, Approx. 330mm Height x 90mm Width
Distilling Receiver, 25mL, Moisture Test, Dean-Stark, 24/40 Joint Size, Approx. 330mm Height x 90mm Width. Similar to CG-1258 but with the addition of an overflow tube between the uptake tube and the graduated receiver.
Chemglass Life Sciences Inlet Feed Tube, 19/38 Joint
Inlet feed tube for “A” assemblies with a 19/38 joint, 90º bore stopcock and PTFE extension tube.
Chemglass Life Sciences 125mL Solvent Distillation Still Head, Airfree, Schlenk
125mL Solvent Distillation Still Head, Airfree, Schlenk. Still head in 125mL capacity for use in re-purification of solvents under inert atmosphere. One-piece design of condenser and storage reservoir eliminates multiple connections usually associated with distillation setup. 0-4mm Chem-Vac™ Chem-Cap valves provide for grease-free, leakproof seals. Lower 3-way valve (C) allows for solvent return to flask, take-off or storage in graduated reservoir. Syringe access port (B) incorporates a 4mm PTFE stopcock with a 14/20 outer joint for use with CG-3022 septum stoppers permitting repeated syringe punctures or changes of the septum without breaching the integrity of the solvent. Valve (A) allows for isolation of the still from the inert gas source. Valve (D) permits evacuation and purging of the receiver flask. Uptake tube (F) is a 24/40 inner joint, while the takeoff connection (E) is a 14/20 inner joint. Design Suggested by Dr. Thomas Oberhauser.
Chemglass Life Sciences Clamp, Nester
Clamp, Nester. Strong brass chromed chain and band with stainless steel rod for holding distillation columns, odd-shaped glassware, etc. Clamp holds apparatus with diameters from 38mm to 102mm.